{"product_id":"immersionrc-ghost-atto-2-4ghz-rx","title":"ImmersionRC Ghost Átto 2.4Ghz Rx","description":"\u003cp\u003eThe Ghost Átto receiver weighs in at about 0.6g, and is only 14.8 x 11.5mm, a 15% smaller footprint than its closest competitor.\u003c\/p\u003e\n\u003cp\u003eMost standard protocols are supported, including PWM, SBus, Fast SBus (200k), SRXL-2 (400k) and an inverted SBus (or rather an inverted-inverted SBus) to increase flexibility with F4 FCs.\u003c\/p\u003e\n\u003cp\u003eDeja-Vu binding ensures that receivers already ‘known’ by a Ghost transmitter (through a previous bind operation) no longer require a button press to bind them. This also goes for new receivers, which will bind for the first time without the need for the button (all of this because we can’t stand tearing models open to find that buried bind button).\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2.4GHz ISM Band\u003c\/li\u003e\n\u003cli\u003e‘JR’ Compatible Transmitter with Diversity Transmission\u003c\/li\u003e\n\u003cli\u003eOne Of The Smallest Receivers On the Market\u003c\/li\u003e\n\u003cli\u003eChirp Spread Spectrum, with Adaptive FHSS\u003c\/li\u003e\n\u003cli\u003eCrazy Race Performance, 222.22Hz updates\u003c\/li\u003e\n\u003cli\u003e~4ms End to End Latency, with OpenTx Integration\u003c\/li\u003e\n\u003cli\u003eMore range than most pilots will ever need\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDownlink RF Power: +13dBm\u003c\/li\u003e\n\u003cli\u003eSensitivity: -117dBm in Long Range mode\u003c\/li\u003e\n\u003cli\u003eSerial Formats: SBus, SBus-Fast (200k) , SRXL-2 (400k), GHST, SBus Inverted\u003c\/li\u003e\n\u003cli\u003eFirmware: Over-the-air (OTA) upgradable\u003c\/li\u003e\n\u003cli\u003ePower Supply: 5V recommended, as low as 3.3V tolerated\u003c\/li\u003e\n\u003cli\u003evTx Control: Tramp control from ‘T’ pin on Rx, regardless of selected serial format\u003c\/li\u003e\n\u003cli\u003eDimensions: 14.8mm x 11.5mm, 0.6g (w\/o antenna)\u003c\/li\u003e\n\u003cli\u003eRx Noise Floor Analysis: Auto on power-up, or on demand from the Tx\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOrqa Goggle Integration\u003c\/h2\u003e\n\u003cp\u003eThat space on the FPV.Connect board… yeah, that is for a Ghost receiver, the Átto.\u003c\/p\u003e\n\u003cp\u003eGhost transmitters and receivers can form a network, without the need to use bluetooth or wifi, and communicate between themselves without sacrificing critical control performance.\u003c\/p\u003e\n\u003cp\u003eClear channel scan with automatic channel assignment, auto-start DVR recording when throttle stick is raised, and a bunch of other cool features planned for 2020.\u003c\/p\u003e\n\u003ch2\u003eProton Packs for Days\u003c\/h2\u003e\n\u003cp\u003eSimple PCBs designed to dramatically simplify wiring, mounting, and cooling of Tramp Nano + Ghost combinations.\u003cbr\u003e36x36 single-sided, 20x20 double sided, 20x20 single sided, ‘Toothpick style’, and a special version designed for the Five33 Tiny Trainer.\u003c\/p\u003e\n\u003ch2\u003eqTee Antennas\u003c\/h2\u003e\n\u003cp\u003eqTee, a.k.a ‘Cutie’ antennas are center-fed dipoles, with integral balun to ensure no cable radiation, and without unexpected nulls in the radiation pattern.\u003cbr\u003eTip to Tip length of just 60mm, easy to install in anything from a Whoop™ to an X-Class quad\u003c\/p\u003e\n\u003ch2\u003eSystems Integrators\/Manufacturers\u003c\/h2\u003e\n\u003cp\u003eImmersionRC is open to discuss with manufacturers who wish to embed Ghost into other systems (Hobby, Industrial, Law Enforcement, etc.). An embedded Ghost 2.4GHz Rx occupies approx. 10mm x 10mm of PCB space.\u003c\/p\u003e\n\u003cp\u003eFor use on sub-GHz bands, the ‘Red Ghost’ product line can be custom ordered for use on licensed bands from 140MHz to 1GHz.\u003c\/p\u003e\n\u003ch2\u003eGPS + Noise\u003c\/h2\u003e\n\u003cp\u003eAnother advantage of running 2.4GHz instead of the more traditional sub-GHz frequencies for long range is that 2.4GHz has no harmonics that can desensitize GPS receivers (which are in the 1.5GHz band), so GPS position fixes become more precise.\u003cbr\u003eIn addition, Drone\/Quad\/UAV electrical noise due to fast switching signals is broadband, and also sub-GHz (typically sub-500MHz), and doesn’t desensitize the 2.4GHz Ghost receiver.\u003c\/p\u003e\n\u003ch2\u003eIncludes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e1 x Atto Receiver\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 x qTee Antenna\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSilicone Cables\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHeat Shrink\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ImmersionRC","offers":[{"title":"Default Title","offer_id":45505978204390,"sku":"14163","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0698\/9525\/8342\/files\/atto-rx-1_1.jpg?v=1734560236","url":"https:\/\/shop.lumenier.com\/products\/immersionrc-ghost-atto-2-4ghz-rx","provider":"Lumenier","version":"1.0","type":"link"}